ND -2011 Medical Hollow Drill/ Medical Cannulated Drill
ND-2011 Medical Hollow Drill/ Medical Cannulated DrillComposition:Battery operated surgical drill&saw is made of main hand piece, charger,battery. The whole outer skin of the hand piece is sealed. Charger is not a medical electric device.Main Technical Data:1.Technical data handpieceWorking v......
Send Inquiry
Product Description
ND-2011 Medical Hollow Drill/ Medical Cannulated Drill
Composition:
Battery operated surgical drill&saw is made of main hand piece, charger,battery. The whole outer skin of the hand piece is sealed. Charger is not a medical electric device.
Main Technical Data:
1.Technical data
3.Application
Holds K-wires or be used in intramedullary interlocking nail surgery or arthroscopic surgery .
Notes:
1):Axial run-out of concentricity is within 0.05mm
2):Rotating speed : 0-650/1000 rpm for choices
3):Rotated torque 12.5N.m/ 7.5N.m
4): interface adapt to various drill
5):Semi-luser surface gives comfortable feel
6): Full sealed motor can be sterilized up to 135 °c
7):Multipurpose interface is easier to use in clinic
8): 4.0mm hollow for all brand needles to pass througth
9): NI-MH battery without memory environment
10):Autoclavable
Composition:
Battery operated surgical drill&saw is made of main hand piece, charger,battery. The whole outer skin of the hand piece is sealed. Charger is not a medical electric device.
Main Technical Data:
1.Technical data
| handpiece | Working voltage | 14.4V |
| Output power | ≥20W | |
| Unit rise in temperature | ≤20°C | |
| charger | Input voltage | AC220V,50Hz |
| Output power | 14.4V, 900mA | |
| Input power | 30VA | |
| Battery | voltage | 14.4V |
| Charging time | About 3 hours | |
| Canulate drill | Output voltage | 100W |
| torque | 12.5/7.5N.m | |
| Rotating speed | 0-650/1000rpm | |
| noise | ≤45dB | |
- Standard configuration
| One drill unit |
| One charger |
| Two batteries |
| Two aspetic battery transfer rings |
| One drill chuck key |
| One instruction manual |
| One Aluminum case |
3.Application
Holds K-wires or be used in intramedullary interlocking nail surgery or arthroscopic surgery .
Technical Merits
Notes:
1):Axial run-out of concentricity is within 0.05mm
2):Rotating speed : 0-650/1000 rpm for choices
3):Rotated torque 12.5N.m/ 7.5N.m
4): interface adapt to various drill
5):Semi-luser surface gives comfortable feel
6): Full sealed motor can be sterilized up to 135 °c
7):Multipurpose interface is easier to use in clinic
8): 4.0mm hollow for all brand needles to pass througth
9): NI-MH battery without memory environment
10):Autoclavable
Related Category
Surgical Equipment
Surgical Instrument
Veterinary Instruments
Universal Medical Implement
Dental Handpiece
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
